IEC60350-2 Standardized Cookware Testing Instrument

• After-sales Service: Provided
• Warranty: 1 Year
• Customized: Non-Customized
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ZLT-VSC
• Structure: Portable
• Material: Steel
• Certification: CNAS Calibration
• Application: School, Lab
• Type: Measurement Type
• IEC 61032: Test Probe Finger
• Appliance: Lab
• Standard: IEC60350-2 Figure 1
• Transport Package: in Box
• Specification: IEC60350-2 figure 1
• Trademark: ZLTJC
• Origin: Guangzhou, China
• HS Code: 9031809090
• Production Capacity: Stock Anytime
• Package Size: 68.00cm * 60.00cm * 75.00cm
• Package Gross Weight: 30.000kg

Product Description

IEC60350-2 Standardized Cookware
Product details:Model ZLT-VSC
To test cooking zone,required settings and the needed cooking time of the cookware,according to IEC60350-2:2017 clause 5.6.1.1 and figure 1.
Standardized cookware-bottom material and construction:
-Material:stainless steel AISI type 430,non-shiny surface;
-Thickness:6mm±0.2mm;
-Dimensions as specified in below table;
-Flatness of bottom plate as specified in below table;a convex shaped bottom plate is not allowed,the flatness of the base has to be checked before starting a measurement;
-Annealing required,for a sufficient permeability of the cookware bottom,the disc has to be annealed,the annealing should be done for approximately 2h at approximately 650ºC in a nitriding furnace.
Standardized cookware-sidewall:
-Material:stainless steel AISI type 304;
-Thickness:1mm±0.05mm;
-Shape:cylindrical without handles or protrusions;
The sidewall is fixed to the bottom plated with heat resistant glue.
Standardized cookware-lid with temperature sensor:
-Material:aluminum;
-Thickness:2mm±0.05mm;
-Dimensions as specified in below table;
-With holes,where each hole on the circle of the lid has diameter of (16±0.1)mm;the holes shall be evenly distributed on the circle.
-The flat lid is adapted to accommodate a temperature sensor in the centre,the temperature sensor is positioned (15±1)mm above the inner cookware bottom.To achieve this,place a (15±1)mm reference block on the bottom of the cookware,mark the sensors and tighten the screws.
Diameter of vessel:Ф120mm,Model ZLT-VSC120
Diameter of vessel:Ф150mm,Model ZLT-VSC150
Diameter of vessel:Ф180mm,Model ZLT-VSC180
Diameter of vessel:Ф210mm,Model ZLT-VSC210
Diameter of vessel:Ф240mm,Model ZLT-VSC240
Diameter of vessel:Ф270mm,Model ZLT-VSC270
Diameter of vessel:Ф300mm,Model ZLT-VSC300
Diameter of vessel:Ф330mm,Model ZLT-VSC330