IEC 60335-1 Annex B20.1 Chemical Battery Case Pressure Testing Device

• After-sales Service: One Year
• Warranty: One Year
• Customized: Non-Customized
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ZLT-CJ8A
• Structure: Desktop
• Material: Stainless Steel , Nylon
• Certification: ISO17025 Calibration Provided
• Application: School, Lab
• Type: Measurement Type
• Usage: for Battery
• MOQ: 1 PC
• Delivery: in 30-35 Days
• Standard: IEC60335-1 Annex B20.1
• Transport Package: in Wood Box
• Specification: 20ml, 30ml, 50ml, 100ml
• Trademark: ZLTJC
• Origin: Guangzhou, China
• HS Code: 9031809090
• Production Capacity: Stock Available
• Package Size: 130.00cm * 75.00cm * 135.00cm
• Package Gross Weight: 60.000kg

Product Description

IEC60335-1 Annex B20.1 Chemical Battery Case Pressure Testing Device

Product detail:Model;ZLT-CJ8A
To measure the enclosure of a battery-operated appliance incorporating an integral battery that uses metal-ion chemistry shall withstand the pressure generated when a cell vents during failure.Conform to IEC60335-1:2020 annex B.20.1.
Test requirement:a volume of air of the amount specified in Table B.3 of IEC60335-1 shall be injected through a (2,85±0,05)mm diameter orifice into the enclosure at an initial overpressure of 2070kPa±10%.Test fittings used for the test shall not increase the enclosure volume by more than 3 ml.The overpressure within the enclosure shall drop below 70kPa within 30 s without any unintended rupturing damage to the enclosure.
                                                        IEC60335-1 Table B.3-Volume of air injected at 2070kPa

Capacity of the single metal-ion cell with the highest capacity         Ah	Volume of air(±10%) ml
0,2≤Ah 5	20
5≤Ah 25	30
25≤Ah100	50
Ah≥100	100

                                                       Technical specification:

Power supply:	AC220V50Hz,other voltages on request.
Control mode:	By PLC
Pressure mode:	Manual mode
Pressure range:	0~4MPa
Volume of air injected at 2070kPa:	20ml,30ml,50ml,100ml.
Diameter of steel orifice:	2,85±0,05mm.
Pressurized medium:	Air.
Test time:	30 S or 0-99999 s can be set.
Test equipment weight:	Approximately 60 kgs.