Flexion Test Apparatus
Product details: Model ZLT-DSG3
Similar to ZLT-DSG2, but according to IEC60947 figure 1 and clause 8.2.4.3, table 5.
Standard Outfit:
1 revolving platen with vertical axis of rotation, to move the conductor, clamped into the specimen,
1 accommodation for bushings, with angular contact ball bearing, built into the revolving platen with eccentricity 37, 5mm, to guide the conductor clamped into the specimen, bore 15mm,
1 AC motor to drive the revolving platen at 10± 2rpm,
1 hand vice to fix the specimen, height(H) adjustable to 260mm-280mm-300mm-320mm-343mm-368mm-406mm-432m-464mm, with interchangeable jaws
1 collar bushings with bore hole diameter 6.5mm-9.5mm-13mm-14.5mm-15.9mm-19.1mm-22.2mm-25.4mm-28.6mm, to be inserted into the accommodation of the revolving platen
1 Pulling weight piece, one of 5N-20N-40N-36N-51N-100N-103N and two of 10N-35N-200N,
1 Mass weight piece, one of 0.2kg-0.3kg-0.4kg-0.7kg-0.9kg-1.4kg-2.0kg-2.9kg-4.5kg-5.9kg-6.8kg-8.6kg-9.5kg-10.4kg-14kg-15kg-16.8kg-20kg-22.7kg.
1 circuit continuity tester to monitor the clamping point, to stop the timer and to switch off the whole machine,
1 rack mounted unit with control panel, with main switch, timer to preselect the desired test duration, push-button for inching, start and stop push-buttons as well as switch to activate monitoring by the circuit continuity tester.
Power supply: 220V 50Hz or 110V60Hz, other voltages on request.
![IEC60947 Figure 1 Testing Equipment Flexion Test Apparatus](//www.micstatic.com/athena/img/transparent.png)
![IEC60947 Figure 1 Testing Equipment Flexion Test Apparatus](//www.micstatic.com/athena/img/transparent.png)
![IEC60947 Figure 1 Testing Equipment Flexion Test Apparatus](//www.micstatic.com/athena/img/transparent.png)